トップ 差分 一覧 ソース 検索 ヘルプ RSS ログイン

tips-mcp4725

12ビットDAC

http://akizukidenshi.com/catalog/g/gK-08677/

https://amzn.to/3bA870k

ArduinoIDE

https://github.com/adafruit/Adafruit_MCP4725

micoropython git

https://github.com/wayoda/micropython-mcp4725

PinOUT

MCP4725bord STM32 esp32
out
gnd
scl PB6(SCL1) gpio-22
sda PB7(SDA1) gpio-21
vcc 3v3
gnd GND

Sample / stm32f103 arudiono ide

/**************************************************************************/
#include <Wire.h>
#include <Adafruit_MCP4725.h>

Adafruit_MCP4725 dac;

int sensorPin1 = 0;   // Select the input pin for the potentiometer
int sensorPin2 = 2;   // Select the input pin for the potentiometer

void setup(void) {
 Serial.begin(9600);
 Serial.println("Hello!");

 pinMode(sensorPin1, INPUT_ANALOG);
 pinMode(sensorPin2, INPUT_ANALOG);

 // For Adafruit MCP4725A1 the address is 0x62 (default) or 0x63 (ADDR pin tied to VCC)
 // For MCP4725A0 the address is 0x60 or 0x61
 // For MCP4725A2 the address is 0x64 or 0x65
 // dac.begin(0x62);
 dac.begin(0x60);
 
 Serial.println("Generating a triangle wave");
}

//*************************************************

float lsb = 3.3/4095 ;

void loop(void) {
   uint32_t counter;
   int tm1 = 0;
   int tm2 = 0;
   // tmp2 = 0;
   // Run through the full 12-bit scale for a triangle wave
   for (counter = 1; counter < 100; counter++)
   {
     // TEMPsenser
     tm2 = analogRead(sensorPin2);
     //
     dac.setVoltage(tm2, false);
     delay(250);
     tm1 = analogRead(sensorPin1);
     Serial.print(tm2);
     Serial.print(",");
     Serial.print(tm2-tm1);
     Serial.print(",");
     Serial.println( (((tm2*lsb)-0.50)*10.0) ,3);
     delay(250);
   }   
}

micropython ESP32

# ここにコードを書いてね :-)
from machine import I2C,Pin
import time
import mcp4725

#create a I2C bus
i2c=I2C(freq=400000,scl=Pin(22), sda=Pin(21)) 

#create the MCP4725 driver
## dac=mcp4725.MCP4725(i2c,mcp4725.BUS_ADDRESS[0])
dac=mcp4725.MCP4725(i2c,96)
###Update the output on the MCP4725 The simple way to update the output on the DAC 
is to write a new value to the device
for i in range(1,1000,100):
   dac.write(i)
   time.sleep_ms(3500)

dac.write(100)

others

tips-mcp4922