tips- SLG46826
SLG46826
PIN(46826G/TSSOP-20)
| 1 | IO14 | GPIO/ACMP0H |
| 2 | IO13 | GPIO/ACMP1H |
| 3 | IO12 | GPIO/ACMP2L |
| 4 | IO11 | GPIO/ACMP3L |
| 5 | IO10 | |
| 6 | IO9 | |
| 7 | VDD2 | Power |
| 8 | IO8 | |
| 9 | IO7 | GPO |
| 10 | GND | Power.ground |
| 11 | IO6 | GPO |
| 12 | SDA | I2C_SDA/Data |
| 13 | SCL | I2C_SCL/Clock |
| 14 | IO5 | GPIO/SLA_3 |
| 15 | IO4 | GPIO/SLA_2 |
| 16 | IO3 | GPIO/SLA_1 |
| 17 | IO2 | GPIO/SLA_0 |
| 18 | IO1 | GPIO/Vref_IN |
| 19 | IO0 | |
| 20 | VDD | Power |
PIN(46826V/STQFN-20)
| 1 | Vdd | |
| 2 | IO0 | |
| 3 | IO1 | GPIO/Vref_IN |
| 4 | IO2 | GPIO/SLA_0 |
| 5 | IO3 | GPIO/SLA_1 |
| 6 | IO4 | GPIO/SLA_2 |
| 7 | IO5 | GPIO/SLA_3 |
| 8 | SCL | I2C_SCL_Clock |
| 9 | SDA | I2C_SDA_Data |
| 10 | IO6 | GPO |
| 11 | GND | |
| 12 | IO7 | GPO |
| 13 | IO8 | |
| 14 | Vdd2 | |
| 15 | IO9 | |
| 16 | IO10 | |
| 17 | IO11 | GPIO/ACMP3L |
| 18 | IO12 | GPIO/ACMP2L |
| 19 | IO13 | GPIO/ACMP1H |
| 20 | IO14 | GPIO/ACMP0H |
ACMP0H+Analog Comparator 0
Positive InputAnalog --ACMP1H+Analog Comparator 1Positive InputAnalog --ACMP2L+Analog Comparator 2Positive InputAnalog --ACMP3L+Analog Comparator 3Positive InputAnalog
Tips
OSC
Properties で [pin mode] [OSC power mode] を [Force on/Force Power on] にしないと信号がでてこない。。。
- https://lang-ship.com/blog/work/greenpak-03-cmp/
- https://lang-ship.com/blog/work/greenpak-04-dff-latch/
- https://lang-ship.com/blog/work/greenpak-05-cnt-dly/
VOC
( 昔のPAL?? )
- https://www.renesas.com/jp/ja/products/programmable-mixed-signal-asic-ip-products/greenpak-programmable-mixed-signal-products/greenpak-system-programmability/slg46826-greenpak-programmable-mixed-signal-matrix-system-programmability
- https://www.mouser.jp/ProductDetail/724-SLG46826G
- https://github.com/K4zuki/silego-trial-report
- https://elchika.com/article/6ddfba55-fa3e-436b-b603-69478b6b450d/#h_Arduino%E3%81%A7%E6%9B%B8%E3%81%8D%E8%BE%BC%E3%82%80%E6%96%B9%E6%B3%95