MK_SOLARIS10_x86の変更点

• 追加された行はこのように表示されます。
• 削除された行はこのように表示されます。

!! Solaris 10 をインストールしてみる

!Solaris 10 のダウンロード
http://jp.sun.com/products/software/solaris/10/
 同じところで Companion CD もダウンロードすること

!Sun Studio 11 のダウンロード
http://developers.sun.com/sunstudio/


! Patch 適用後の再起動
 shutdown -y -i 6 -g 0

! ifconfig TIPs
 ifconfig vfe0:1 plumb 192.168.1.221/24 up


!Solaris Express
http://developers.sun.com/solaris/downloads/solexpdev/

!GNU などのインストール
http://www.sunfreeware.com

から

bison-1.875d-sol10-intel-local
libiconv-1.8-sol10-intel-local
flex-2.5.4a-sol10-intel-local
make-3.80-sol10-intel-local
gcc-3.3.2-sol10-intel-local

をダウンロードしてインストールしてPATHを通しておく

 後は次の sh を実行

 # echo wget
 #   cd /export/home/FOO/foo/tmp; if [ ! -f wget-1.10.tar.gz ]; then
 #     wget ${SRCURL}/gnu/wget-1.10.tar.gz
 #   fi
 #   cd /export/home/FOO/foo/tmp; gzip -d < wget-1.10.tar.gz | tar -xvf -
 #   cd /export/home/FOO/foo/tmp; cd wget-1.10
 #   cd /export/home/FOO/foo/tmp; cd wget-1.10; ./configure
 #   cd /export/home/FOO/foo/tmp; cd wget-1.10; ${MAKE}
 #   cd /export/home/FOO/foo/tmp; cd wget-1.10; ${MAKE} install
 
 echo make
  cd /export/home/FOO/foo/tmp; if [ ! -f make-3.80.tar.gz ]; then
    wget ${SRCURL}/gnu/make-3.80.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf make-3.80
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/make-3.80.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd make-3.80; ./configure --prefix=/usr/local
  cd /export/home/FOO/foo/tmp; cd make-3.80; ${MAKE} clean
  cd /export/home/FOO/foo/tmp; cd make-3.80; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd make-3.80; ${MAKE} install
  mv /usr/local/bin/make /usr/local/bin/${GMAKE}
  
 
 echo m4-1.4.3:
  cd /export/home/FOO/foo/tmp; if [ ! -f m4-1.4.3.tar.gz ]; then
    wget ${SRCURL}/gnu/m4-1.4.3.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf m4-1.4.3
  cd /export/home/FOO/foo/tmp; gzip -d < /export/home/FOO/foo/tmp/m4-1.4.3.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd m4-1.4.3; ./configure --prefix=/usr/local
  cd /export/home/FOO/foo/tmp; cd m4-1.4.3; ${MAKE} clean
  cd /export/home/FOO/foo/tmp; cd m4-1.4.3; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd m4-1.4.3; ${MAKE} install
 
 
 echo autoconf-2.59:
  cd /export/home/FOO/foo/tmp; if [ ! -f autoconf-2.59.tar.gz ]; then
    wget ${SRCURL}/gnu/autoconf-2.59.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf autoconf-2.59
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/autoconf-2.59.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd autoconf-2.59;  ./configure
  cd /export/home/FOO/foo/tmp; cd autoconf-2.59; make clean
  cd /export/home/FOO/foo/tmp; cd autoconf-2.59; make
  cd /export/home/FOO/foo/tmp; cd autoconf-2.59; make install
 
 echo automake-1.9.5:
  cd /export/home/FOO/foo/tmp; if [ ! -f automake-1.9.5.tar.gz ]; then
    wget ${SRCURL}/gnu/automake-1.9.5.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf automake-1.9.5
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/automake-1.9.5.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd automake-1.9.5;  ./configure
  cd /export/home/FOO/foo/tmp; cd automake-1.9.5; ${MAKE} clean
  cd /export/home/FOO/foo/tmp; cd automake-1.9.5; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd automake-1.9.5; ${MAKE} install
 
 echo flex-2.5.33:
  cd /export/home/FOO/foo/tmp; if [ ! -f flex-2.5.33.tar.gz ]; then
    wget ${SRCURL}/gnu/flex-2.5.33.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf flex-2.5.33
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/flex-2.5.33.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd flex-2.5.33; ./configure --prefix=/usr/local
  cd /export/home/FOO/foo/tmp; cd flex-2.5.33; ${MAKE} clean
  cd /export/home/FOO/foo/tmp; cd flex-2.5.33; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd flex-2.5.33; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd flex-2.5.33; ${MAKE} install
 
 
 echo bison-2.0
  cd /export/home/FOO/foo/tmp; if [ ! -f bison-2.0.tar.gz ]; then
    wget ${SRCURL}/gnu/bison-2.0.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf bison-1.875
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/bison-2.0.tar.gz | tar -xvof -
  cd /export/home/FOO/foo/tmp; cd bison-2.0; ./configure --prefix=/usr/local
  cd /export/home/FOO/foo/tmp; cd bison-2.0; ${MAKE} clean
  cd /export/home/FOO/foo/tmp; cd bison-2.0; ${MAKE}
  cd /export/home/FOO/foo/tmp; cd bison-2.0; ${MAKE} install
 
 
 echo binutils-2.16:
  cd /export/home/FOO/foo/tmp; if [ ! -f binutils-2.16.tar.gz ]; then
    wget ${SRCURL}/gnu/binutils-2.16.tar.gz
  fi
  cd /export/home/FOO/foo/tmp; rm -rf binutils-2.16
  cd /export/home/FOO/foo/tmp; gzip -d <  /export/home/FOO/foo/tmp/binutils-2.16.tar.gz | tar -xvof -
  rm -f /usr/local/bin/ar /usr/local/bin/sparc*-sun-solaris*-ar
  rm -f /usr/local/bin/ranlib /usr/local/bin/sparc*-sun-solaris*-ranlib
  rm -f /usr/local/bin/nm /usr/local/bin/sparc*-sun-solaris*-nm
  rm -f /usr/local/bin/ar /usr/local/bin/i?86*-*-solaris*-ar
  rm -f /usr/local/bin/ranlib /usr/local/bin/i?86*-sun-solaris*-ranlib
  rm -f /usr/local/bin/nm /usr/local/bin/i?86*-*-solaris*-nm
  cd /export/home/FOO/foo/tmp; cd binutils-2.16; ./configure --prefix=/usr/local  --enable-shared
 #  cd /export/home/FOO/foo/tmp; cd binutils-2.16; ./configure --prefix=/usr/local --disable-shared --disable-nls
  cd /export/home/FOO/foo/tmp; cd binutils-2.16; ${GMAKE} clean
  cd /export/home/FOO/foo/tmp; cd binutils-2.16; ${GMAKE}
  cd /export/home/FOO/foo/tmp; cd binutils-2.16; ${GMAKE} install
  cd /export/home/FOO/foo/tmp; rm -rf binutils-2.16

 # download source file
 echo gcc-4.1.2
 cd /export/home/FOO/foo/tmp
  if [ ! -f gcc-core-4.1.2.tar.bz2 ]; then
    wget http://www.db.is.kyushu-u.ac.jp/computer/src/gnu/gcc-core-4.1.2.tar.bz2    
  fi
 # extract source file
 cd /export/home/FOO/foo/tmp
  rm -rf gcc-4.1.2
  /usr/bin/bzip2 -d <  gcc-core-4.1.2.tar.bz2 | /usr/bin/tar -xvof -
 # configure, make, and install
 cd /export/home/FOO/foo/tmp/gcc-4.1.2
  mkdir build
  cd build
  ../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-shared
 #  ../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-shared -disable-nls
  /usr/local/bin/gmake bootstrap
  /usr/local/bin/gmake install
  /usr/local/bin/gmake clean
 
 # download source file
 echo gcc-3.4.5
 cd /export/home/FOO/foo/tmp
  if [ ! -f gcc-3.4.5.tar.gz ]; then
    wget http://www.db.is.kyushu-u.ac.jp/computer/src/gnu/gcc-3.4.5.tar.gz
  fi
 # extract source file
 cd /export/home/FOO/foo/tmp
  rm -rf gcc-3.4.5
  /usr/bin/gzip -d <  gcc-3.4.5.tar.gz | /usr/bin/tar -xvof -
 # configure, make, and install
 cd /export/home/FOO/foo/tmp/gcc-3.4.5
  mkdir build
  cd build
  ../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-shared
 #  ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --enable-shared --disable-shared
  /usr/local/bin/gmake bootstrap
  /usr/local/bin/gmake install
  /usr/local/bin/gmake clean
 
 exit
 #


----
! vi の8bit 対応変更
 $HOME/.profile を修正
 
 --- $HOME/.profile.old
 +++ $HOME/.profile
 @@ -3,7 +3,7 @@
  # All rights reserved.
  #
  # ident        "@(#)local.profile      1.10    01/06/23 SMI"
 -stty istrip
 +#stty istrip
 PATH=/usr/bin:/usr/ucb:/etc:.

! Patch 適用後の再起動
 shutdown -y -i 6 -g 0

! ifconfig TIPs
 ifconfig vfe0:1 plumb 192.168.1.221/24 up