- 追加された行はこのように表示されます。
- 削除された行は
このように表示されます。
!ネットワークを見てみよう。
最近雑誌などで、よく見るネットワークの監視ツールで
Nfsen/nfdump と言うツールを見たので自宅のFreeBSDで設定してみよう
----
!/boot/loader.conf
に追加(こんなに設定いるのか??)
# ng_netflow_load="YES" # Cisco's NetFlow netgraph note type
ng_UI_load="YES" # UI netgraph node type
ng_eiface_load="YES" # generic Ethernet interface netgraph node type
ng_ether_load="YES" # Ethernet netgraph node type
ng_fec_load="YES" # netgraph Fast EtherChannel node
ng_gif_load="YES" # generic tunnel interface netgraph node type
ng_hub_load="YES" # packet distribution netgraph node type
ng_iface_load="YES" # interface Netgraph node type
ng_ip_input_load="YES" # netgraph IP input node type
ng_ksocket_load="YES" # kernel socket netgraph node type
ng_netflow_load="YES" # Cisco's NetFlow netgraph node type
ng_one2many_load="YES" # packet multiplexing netgraph node type
ng_socket_load="YES" # Netgraph socket node type
ng_split_load="YES" # netgraph node to separate incoming and
ng_tee_load="YES" # Netgraph ``tee'' node type
--
----
!/etc/set_netflow.conf を作成
# /usr/sbin/ngctl -f- <<-SEQ
mkpeer fxp0: netflow lower iface0
name fxp0:lower netflow
connect fxp0: netflow: upper out0
mkpeer netflow: ksocket export inet/dgram/udp
msg netflow:export connect inet/192.168.2.98:9997
# SEQ
--
----
! netgraph を起動
/usr/sbin/ngctl -f /etc/set_netflow.conf
--
----
! nfdump/nfsen を起動